General Information
Expedient.com
Network Status
Local Access Numbers
Servers and Settings
Min System Requirements
Supported Software
Spam & Security
Virus Protection
Tech Tips & Support Links
Virtual Applications

Speed Test

iPass Global Roaming Configuration

Windows

To setup the iPass Dial Wizard for Windows:

• Double click the iPass Connect icon.
• Click the Options menu and choose Dial Properties.
• Set the Dial Properties as appropriate for the location from which you are dialing. We recommend setting the 'Location same as selected number' option. Click OK.
• Click the Options menu and choose User info.
• Enter your username (in the form of username@stargate.net) and password into the Username and Password fields. Choose the correct domain from the drop-down menu and click OK.
• Click the Options menu and choose Settings.
• If you would like a specific program to open after iPass has connected, set it up on the General tab.
• Click the Dialup tab.
• If necessary, select your modem from the list, and set your Redialing options (We do not recommend using the SmartRedial option). Click OK.

To use the iPass Dial Wizard for Windows:

• Double click the iPass Connect icon.
• Select the Country, State or Territory (if applicable), City, and Area Code (if necessary).
• Select the Access Point that you would like to use.
• The number will show, as it will be dialed, in the box next to the Dialing Properties button. If necessary, click Dialing Properties to set the correct dialing prefixes.
• Click Connect.

  If you will be dialing a certain number many times, click the Add Bookmark button. This number will be available under the Bookmarks menu.

Macintosh

To setup the iPass Dial Wizard for Macintosh:

• Open the iPass Dial Wizard. It should be located in the iPassConnect folder on the Hard drive.
• Click the Options menu and choose Dial Properties.
• Set the Dial Properties as appropriate for the location from which you are dialing. We recommend setting the 'Location same as selected number' option. Click OK.
• Click the Options menu and choose User info.
• Enter your username (in the form of username@stargte.net and password into the Username and password fields. Choose the correct domain from the popup menu and click OK.
• Click the Options menu and choose Settings.
• Set your Redialing options (We do not recommend using the SmartRedial option).
• If you would like a specific program to open after iPass has connected, set it up in the section at the bottom. Click OK.

To use the iPass Dial Wizard for Macintosh:

• Open the iPass Dial Wizard. It should be located in the iPassConnect folder on the Hard drive.
• Select the Country, State or Territory (if applicable), City and Area Code (if Necessary).
• Select the Access Point that you would like to use.
• The number will show, as it will be dialed, in the box next to the Dialing Properties button. If necessary, click Dialing Properties to set the correct dialing prefixes.
• Click Connect.