General Information
Expedient.com
Local Access Numbers
Servers and Settings
Min System Requirements
Supported Software
Spam & Security
Virus Protection
Tech Tips & Support Links
Virtual Applications

Speed Test

MacPoET

Install MacPoET
Configure TCP/IP
Connecting with MacPoet

Install MacPoET

Note: Do not install MacPoET on Macintosh OS X. OS X has a built in PPPoE client that should be used instead. Click here for setup instructions.

Double click the MacPoET Installer.

Highlight and drag Install MacPoet onto the hard drive icon, as described in the installer.

Click Restart when prompted.

Configure TCP/IP

After the computer restarts, you must configure TCP/IP.

• Click the Apple menu, choose Control Panels, and click TCP/IP.
• Select Ethernet from the Connect via: popup menu.
• The Configure option should be set to Manual.
• Enter 192.0.0.1 for the IP Address.
• Enter 255.255.255.0 for the Subnet Mask.
• Enter 192.0.0.2 for the Router Address.
• Enter your Expedient DNS servers into the Domain Server Addr field.
• Type expedient.net into the Additional Search Domain field.
• Close TCP/IP and save the changes.

  

  In order to run MacPoet, Appletalk protocols must be enabled. After installing MacPoet, if Appletalk is not enabled, an alert box with the following messsage, "MacPoet INIT:Get autopush ioctl failed", may appear. To enable Appletalk, select and configure the Appletalk Control Panel and make sure the Appletalk Active radio button is selected in the chooser.

Connecting with MacPoET

Locate the MacPoET folder on your hard drive and double click the MacPoet application.

Note: We recommend creating an alias to MacPoet and dragging it to the desktop

Enter your username and password. Your username should be in the form of username@expedient.net or username@dsl.stargate.net. If you want MacPoET to connect automatically when the computer starts, select Save Password and Connect at Startup.

Click Connect to start the connection.

 

	Was this information helpful?
	not at all very helpful!