General Information
Expedient.com
Network Status
Local Access Numbers
Servers and Settings
Min System Requirements
Supported Software
Spam & Security
Virus Protection
Tech Tips & Support Links
Virtual Applications

Speed Test

Alltel Efficient Speedstream 5200 Configuration

Windows

1. Go to the Network Control Panel.
2. Select TCP/IP > NIC and go to Properties .
3. On the IP Address Tab, select obtain an IP address automatically.
4. On the Wins Configuration Tab, select Disable WINS Resolution unless applicable.
5. On the Gateway Tab, make sure there is no default gateway set.
6. On the DNS Tab:
   • Select Enable DNS
   • Host = username
   • Domain = expedient.net
   • DNS = 208.138.204.22, 208.138.204.21

Macintosh

1. Go to Apple and select Control Panels .
2. Select TCP/IP
   • Connect via: Ethernet
   • Configure: Manually
   • IP Address: 192.168.1.10
   • Subnet Mask: 255.255.255.0
   • Router Address: 192.168.1.1
   • Name Server Address: 208.138.204.22, 208.138.204.21
   • Additional Search domains: expedient.net

Step 2: Configure the Efficient Speedstream 5200

Tango Access software ships with the modem. Click here for the Tango Access Software Virtual Application Tour. Tango is optionally installed during the modem setup.

Click here for the Alltel Speedstream 5200 DSL QuickStart Online Walkthrough

The Tango software can be removed and the native PPPoE or PPPoE software can be configured on the client. Remove Tango by going to Start > Settings > Control Panel > Add/Remove Programs. Remove "Efficient Speed Stream Modem" and "Tango Manager". Configure native PPPoE or PPPoE software such as WinPoET on the client (computer) and set the DNS.

 

	Was this information helpful?
	not at all very helpful!