 |
Post-Terminal Window
Useful for determining whether a connection problem is due to DUN and/or TCP/IP or the modem. Garbage characters (or dashes and C characters) usually occurs with X2 modems; this is related to the V.42 error correction protocol. If you have a USR x2 modem add: ATS15=128 to the Extra Settings in the modem properties of the connectoid. This will change the error correction protocol to MNP. For all modems, make sure 'use error control' is selected. If extra characters appear beside the login/password prompts, there is a modem configuration issue.
How to bring up a post-terminal window
Windows 98
Go to My Computer > Dial-Up Networking, right-click connection and select Properties. On the General tab, click the Configure button. Click the Options tab. Place a check in the second option, "Bring up terminal window after dialing". After troubleshooting, remove the option to use the post-terminal window.
Windows ME
Go to Start > Settings > Dial-up Networking. Right-click connection and select Properties. On the General tab, click the Configure button. Click the Options tab. Place a check in the second option, "Bring up terminal window after dialing". After troubleshooting, remove the option to use the post-terminal window.
Windows 2000
Go to My Computer > Dial-up Networking. Select the connection in the drop-down. Click More then select Edit entry and modem properties.... Go to the Script tab and place a check in "Pop up a terminal window". After troubleshooting, remove the option to use the post-terminal window.
 |
Was this information helpful?
|
 |
 |
| |
 |
|
 |
|
|
Print Page |
Contact Us |
